Driveway sealing is a simple and low-cost method of protecting and extending the life of your driveway. Asphalt surfaces are highly vulnerable to weather and motor traffic wear and tear, and the grade of asphalt frequently used on driveways is even more so. Regular driveway sealing provides the extra protection your driveway requires to endure longer and avoid degradation.
Maintenance is required on a regular basis.
If you’re not convinced, consider how much maintenance your community’s asphalt roads require to stay in excellent shape. When you consider that road asphalt is generally of a higher grade and is designed to withstand more abuse than asphalt used in driveways, it’s easy to see why it’s critical to keep up on routine maintenance, such as asphalt sealing, in order to avoid major projects like repaving a crumbling asphalt surface.
When it comes to protecting your concrete driveway, sealing it offers several advantages. To begin with, a properly applied driveway sealer repels water, which is possibly the single most damaging factor in the deterioration of asphalt surfaces. If water is allowed to infiltrate concrete, it has a natural propensity to fracture, which is exacerbated by the weight of automobiles running over it on a frequent basis. Water destroys it far more after those fractures form, especially in cold locations where it expands and shrinks with freezing temperatures.
Sunlight and oxygen, both of which cause corrosion, are other enemies of your driveway. By using a good Texas driveway sealer on a regular basis, you can keep water, sunshine, and air from penetrating your asphalt and causing these issues. In addition to repelling oil spills and leaks, driveway sealing makes it considerably easier to sweep and clean your driveway surface.
When Should You Use It?
You should seal your driveway every 1 to 3 years as a general guideline. If the color of the individual stones that make up your asphalt surface can be seen, you know it’s time to seal it up. However, there are a few guidelines to follow before sealing. To begin, never seal a brand-new asphalt driveway. It takes at least six months for the oils in asphalt to dissipate. The less oil used, the more difficult the driveway will be, which is the purpose. If you apply driveway sealer before the asphalt has had time to cure, it will not attain the required hardness, and your efforts will be in vain. The outside temperature, which must be fifty degrees or greater for the sealer to adhere correctly, and the weather are also factors to consider. It’s best if the sealer has been on your driveway for at least 48 hours before it becomes wet.